PowerPlasma Plasma Cutters: PowerPlasma 60S

PowerPlasma 60S

Features & Benefits

  • Easy starting with Pilot arc allows easy cutting of rusty and painted metals.

  • Cuts virtually any type of metal with ease.

  • Simple to use torches with inexpensive service parts and consumables.

  • High duty cycle @ 60% of rated amperage capacity.

  • Exceptionally clean, smooth cuts.

  • Adjustable Post Flow (power plasma only) control up to 60 seconds to improve consumable and torch life.

  • Front air pressure adjustment makes adjusting pressure easy and painless. (PowerPlasma only)

  • Front air pressure gauge allows quick verification of air pressure.

  • Over Current and Air Pressure light indicators keep you updated on your units operating condition.

Price 1,051.70 €

including shipping, handling and VAT 24 %

 

Recommended Areas Of Use

  • Cutting in all conditions where Oxy Fuel cutting is impractical, slow, unsafe, expensive, or otherwise restricted or undesirable.
  • Excellent choice for smooth cut requirements without warping metal from high heat input typical of Oxy fuel torches.

Standard Equipment

  • Torch
  • Consumable starter kit
  • Water trap/filter
  • Air pressure gauge

Optional Equipment

  • Welding helmet with special 7 shade for plasma cutting
  • Consumable Kit
  • Welding cart

Recommended Metals

  • Virtually all types of metal

spec

 

PowerPlasma 50

PowerPlasma 50S

PowerPlasma 60S

PowerPlasma 60S

PowerPlasma 80S

PowerPlasma 80S

PowerPlasma 100

PowerPlasma 100

Over Current Warning Yes Yes Yes Yes
Input Voltage 220/240 V 1ph 400V 3ph 400V 3ph 400V 3ph
Max Start Input Amps 39A @ 220V - - -
Max Running Amps 31A @ 220V - - -
Pilot Arc YES YES YES YES
Input Current 39 A 27 A (3ph) 70 A  
4T/2T Remote Yes Yes Yes Yes
OCV Voltage 200 V 200 V 200 V 200 V
Post Flow Timer 0-60 s 0-60 s 0-60 s 0-60 s
Duty Cycle @ Rated Amps 60%@ 50 A 60%@ 60 A 60%@ 80 A 60 % @ 100 A
Maximum Severance Cut Steel(Less 20% AL/SS) 25.4mm 31.7mm 38.1mm 35mm
Recommended maximum cut @ 10-12 ipm in steel. Decrease by 25-30% for Aluminium 19mm 25.4mm 31.7mm 30mm
PSI/CFM Requirements 55-70 psi/ 3.5 cfm 55-70 psi/ 4.5 cfm 50-65 psi/ 7 cfm 50-65 psi/ 3,5-4,5bar
Shipping Weight 30 kg - 30 kg 50 kg

EVERLAST Europe: JFORCE Enginering | Jussilankatu 12, 15680 Lahti Finland | +358 44 2626321